Filler word guide

How to remove “um” from a video

Every speaker says “um”, “uh” and “like”. On camera they add up to seconds of dead time that make viewers swipe. You can cut them by hand in any editor, delete them from a transcript, or let an AI editor find and remove them. Here is each way, step by step.

2 videos free to try with AI · Works in your browser · Also on iPhone and Android

The raw take of a talking video before filler words and pauses are cut
Before: the raw take
Clean up template: a talking video with pauses and filler words cut out
Clean up: just the cuts
The same talking video after the clean edit, tighter and captioned
After: the clean edit

Why cutting filler words helps

An “um” lasts less than a second, but a two-minute take can easily hold twenty of them, plus pauses while you think. In a short video that is a big share of the runtime with nothing happening. Viewers decide whether to stay in the first moments, and long gaps give them a reason to leave.

Removing filler words also makes you sound surer of what you are saying. The words are the same; you just get to the point faster. The goal is not to sound like a robot. It is to remove the sounds that carry no meaning, while keeping the pauses that help a point land.

Way 1: Remove “um” by hand

This works in any editor with a split or razor tool, including the free ones on your phone. It takes the longest, but you decide every cut.

  1. Turn on the audio waveform. Load the clip into your editor and make the audio track tall enough to see the waveform. Filler words show up as short, low, rounded bumps between the sharper shapes of real words.
  2. Find each “um”. Play the clip at normal speed and drop a marker every time you hear “um”, “uh” or a false start. Then zoom into the timeline at each marker.
  3. Split before and after it. Put the playhead just after the last word before the filler and split. Move to just before the next word starts and split again.
  4. Delete and close the gap. Delete the piece in the middle and close the gap (often called a ripple delete) so the next word follows right away.
  5. Smooth the cut. Play across the cut. If you hear a click or a cut-off breath, nudge the edit by a frame or two, or add a very short audio fade.

Tip: cut where the waveform is flat, between words, rather than in the middle of a sound. Cuts in silence are almost invisible to the ear.

Way 2: Delete filler words from a transcript

Several editors now turn your speech into a transcript you can edit like a document. Delete a word in the text and the matching piece of video disappears. Descript works this way, and Adobe Premiere Pro’s text-based editing can detect filler words so you can remove them together.

If you edit in CapCut, the dependable way is the manual one above: split around each “um” and delete. CapCut has been adding transcript and filler-word tools to its captions features, but names and availability vary by version and plan, so check the captions area of your version for a filler-word option before cutting by hand.

Whatever tool you use, listen back after a bulk delete. Automatic detection can catch a real word that sounds like a filler, such as “uh-huh” meant as “yes”, or miss a mumbled one.

Way 3: Let an AI editor do the clean cut

AI editors built for talking videos go one step further: they cut filler words, long pauses and repeated takes in one pass. Good ones let you choose how tight the cut is and show you every cut so you can put back anything you wanted to keep. More on how this works on our remove filler words page.

After the cut: hide the jumps

Removing words from a face-to-camera shot creates a jump cut: your head moves slightly from one frame to the next. In short-form video that is normal and even expected, but a few tricks make it smoother:

  • Alternate a slight zoom (around 10–20%) on every other cut, so the jump looks like a deliberate camera change.
  • Cover a cut with B-roll, a cutaway shot of what you are talking about. Our guide to B-roll has ideas.
  • Keep one or two pauses before a punchline or a big number. Total silence removal can make speech feel breathless.
  • Add captions after cutting, not before, so they match the final timing.

How to say “um” less in the first place

Editing fixes the video; practice fixes the habit. A few things help most people quickly:

  • Pause instead. When you feel an “um” coming, close your mouth and pause. A silent beat sounds confident on camera and is easy to trim.
  • Use bullet points, not a full script. Know your three points in order. Reading word for word makes you stumble; knowing the outline keeps you moving.
  • Film in short sections. Record one point per take. Shorter takes mean fewer fillers, and if you restart a line, the editor can keep the better take.
  • Slow down a little. Fillers often come from talking faster than you think. A slightly slower pace gives your brain time to find the next word.
  • Watch one old video. Count your fillers once. Knowing your habit word, whether it is “um”, “like” or “so”, makes it easier to catch.

The SparkRoll way

SparkRoll’s Clean cut removes pauses, “um”s and retakes as soon as you add a talking clip. Set the Cut dial to Gentle, Standard or Tight depending on how much breathing room you want. If you drop in several takes of the same line, it keeps the best take of each.

  1. Add your clip on the web, iPhone or Android.
  2. Check Review. It plays your original beside the edit and lists every cut with Hear it and Put back.
  3. Ask for changes in plain words: “keep the pause before the punchline” or “make it tighter”.
  4. Add captions and a hook, then export a vertical video for TikTok, Reels or Shorts.

The cuts land between words; your voice is not replaced or regenerated. Try it on 2 videos free with AI, and see remove pauses from video for the details.

Questions, answered

How do I remove “um” from a video for free?

In any free editor, split the clip just before and just after each “um”, delete the middle piece and close the gap. It takes time but costs nothing. SparkRoll also lets you try its automatic clean cut on 2 videos free.

How do I remove ums in CapCut?

The method that works in every version: zoom into the timeline, split before and after each “um”, delete the piece and close the gap. Newer versions may offer a filler-word option in the captions tools, depending on your version and plan.

Can AI remove filler words automatically?

Yes. Transcript-based and AI editors detect “um”, “uh” and long pauses and cut them in one pass. Always listen back, because detection can miss a mumbled filler or catch a real word.

Will removing ums make my video look choppy?

Each cut makes a small jump in the picture. Alternating a slight zoom on cuts, or covering some with B-roll, keeps it smooth.

How do I stop saying um when I speak?

Pause silently instead of filling the gap, speak from bullet points rather than a word-for-word script, and record one point per take.

Ready to edit by talking?

Upload a clip, say what you want, and get a finished edit. 2 videos free to try.

Get the app: App Store · Google Play